StringTrees
Fling your rings down the rope to score pointsâor push your competitionâs rings off to take the lead.
- Do not use for purposes other than original use
- Use only on flat and solid surfaces
- Be cautious during assembly to prevent injury
- Carrying capacity is based on even weight distribution
- Keep away from excessive heat and open flames
Step 1 of 7
Step 1 of 7
Step 1 of 7
Step 1 of 7
Step 1 of 7
Step 1 of 7
Step 1 of 7
- Find two sturdy attachment points (for example: a tree, fence post, vehicle, pole, etc.) between 14 ft / 4.3 m to 20 ft / 6.1 m apart. Recommended height of the rope is about shoulder height of the players.
- Tie a girth hitch with looped end of the rope. Attachment point should be no more than 12 in / 30.5 cm diameter. To do this, take the looped end and wrap it around the first attachment point. Feed opposite end through looped end and pull. Or, secure the looped end using a carabiner (not included) or any other attachment device.
- Secure the other end of rope using the adjustable strap and tighten. Rope should be taut with no sagging. Itâs designed to stretchâadjust strap so thereâs as much tension as possible. Ensure attachment points are secure to prevent injury.
- Letâs PLAY.
- 9mm Nylon Rope
- Nylon Webbing
- 8 Metal Rings
Fling your rings down the rope to score pointsâor push your competitionâs rings off to take the lead.